DIY Electric Car Forums banner

Reaction score
3

Marketplace Rating
(0.0 - 0 reviews)

Profile posts Latest activity Discussions Buy & Sell Reviews About

  • · Registered
    Joined
    ·
    0 Posts
    Val,
    This is Richard Halstead, I thought I'd say HI. I don't want you to think I'm stocking you I have been reading about your life on this and other forms for the past 4 years. I like to know who I'm dealing with. I wanted you to know I feel confident dealing with you. I would like to ask you if it would be possible to get a build kit for the power supply I just bought from you. It should not be to hard for me since I will have the boards all ready assembled with the power supply I just bought. To give you a
    little back ground about me I have been a machinest for 35year and have owned my own shop for years until I sold it. I still have several mill in my garage now. I also have a 4 year degree in electronics. Anyway If I could get a good deal on a power supply I have to buy another controller and plug and cord. This was I'll have a backup. Think about it and let me know. Richard

    · Registered
    Joined
    ·
    5 Posts
    Hi Valery,

    My EV is now completed, and the V9 charger is 99% complete. Just a few small issues that we need clarification on.

    (1) The Control unit schematic (Rev 4.0 6/23/2011) is that the correct schematic for the V9 charger?

    (2) Is R44 (on controller) meant to be 330 ohms or 220 ohms

    (3) Is R44 which is connected to "old out" to go to the power board and if so where?

    (4) Does "G" on the Power Board connect to common (Pin 4 of U3 (LM211))?

    (5) There is only one 82k (2 watt) resistor on the PFC power board, but the "Rev 1.0" shows two (one is R4). Should there be one or two?

    Many thanks

    Tony

    · Registered
    Joined
    ·
    2 Posts
    How are you recently? We Sinopoly have established inventory in USA, providing technical support and aftersales service. Batteries of 40, 60, 66, 100, 200, 300, 400 Ah are ready to deliver.
    tlu@sinopolynewenergy.com

    · Registered
    Joined
    ·
    1 Posts
    ZYC tech is one of the leading new energy producers in China
    Our company focuses on producing LiFePo4 cells
    Here are the main advantages of us:*
    1Mass production making sure in time delivery
    2. Strength in R&D, 17 invention patents achieved; And we are will to develop new cell model according to your potential project
    3. together with famous Universities and other strategic co-operation partners, the company leads the industry in new technological development.*
    4. Certificates Obtained: ISO 9001, MSDS, UN38.3, CE certificate,ROHS 201 institute inspection report
    5. Global partners: kLM, Yadea, Zotye
    6. Rich products range from 20 AH to 200 AH.
    7 Battery packs are for electric cars, golf carts, electric buses, electric forklifts, post vehicles and function vehicles

    We are now looking for suitable partners who has sales channels as well as after service ability and cooperate in long term basis
    We believe you will be the suitable one!
    Feel free to contact me

    · Registered
    Joined
    ·
    0 Posts
    Hello ...
    I am new here. I want information about " how to connect Diesel 5hp engine to drive 1ton capacity single roller to roll the cricket pitch"?
    pls gave me idea.

    Thanks
    Akshay

    · Registered
    Fiat 124 Spider (Kostov 11HV), BMW 330Ci (NetGain 11HV), Piper Aircraft Malibu (YASA)
    Joined
    ·
    1,541 Posts
    Hi Q -

    quick answers:

    1. the KickStarter guys have resonably good guidelines on their site. I'd also do a search on Google for something like 'good kickstarter project' etc for more ideas. Video under 3 min and showing product in action. Ideally at least semi-professionally shot. Check out some projects in your category that were recently fully funded for even more ideas. Very educational

    2. Yes, KS requires you to use Amazon payments. PITA to set up, especially if you want to use a business account

    3. We had to post our problems setting up Amazon account on facebook and twitter - were not getting any traction with their support before that. Aftre that, all issues fixed within 2 hours.

    4. would be awesome ;-)) http://www.kickstarter.com/projects/1076207974/emw-juicebox-an-open-source-level-2-ev-charging-st

    Thanks,
    Valery

    · Registered
    Joined
    ·
    15 Posts
    Thanks V,

    regarding kickstarter project:

    A couple of questions:

    1. What do you consider a good submission and video?
    2. WHat is amazon payment gateway? Is this to receive payment?
    3. What do you mean you created a huge amount of noise on facebook, twitter?
    4. What is the name of your project on kickstarter? I'd like to back it

    Thanks

    Q

    · Registered
    Fiat 124 Spider (Kostov 11HV), BMW 330Ci (NetGain 11HV), Piper Aircraft Malibu (YASA)
    Joined
    ·
    1,541 Posts
    yes, you will get a correct SOC. Thanks!

    · Registered
    Joined
    ·
    1 Posts
    AH is the remaining, or used energy, right? That means I would still got a correct SOC?

    You did great work with the EV Dasshboard;-)

    Chris

    · Registered
    Joined
    ·
    1 Posts
    Hi Valery

    I have a question about the EV-Display with an android device. If i forget to turn on the tablet when start driving with full battery pack, will the energy consumption count still be correct if I start it later? Or is there some information lost?

    I want to buy it for my Fiat-126 EV conversation.

    Thanks for your help
    Chris
  • Loading…
  • Loading…
  • Loading…
  • Loading…
  • Loading…
Top