DIY Electric Car Forums banner

Curtis controller 1231-8601, Charger 144v/10a

3K views 4 replies 3 participants last post by  Dougnutz 
#1 · (Edited)
Curtis controller 1231-8601, Charger 144v/10a
The Curtis controller is used, it has somewhere around 10k miles on it. I works perfectly, I miss diagnosed it as bad and ordered a zilla controller. While waiting on the controller I posted about my problem on DIY electric car and someone figured out I had a wiring problem. I fixed the problem and the car started working again. But since I had bought the Zilla I was looking forward to it and did the upgrade anyway. Now it’s up for sale. Pot box is not included
Voltage 96-144VDC amps 500A
Good info and manuals here http://www.evsource.com/tls_curtis.php
I also have a “quick charge” brand charger for 144 v lead acid batteries. It can be programmed for 3 different types of charge cycles including some specialized AGM charging profiles. It’s a nice little package. I converted to Lithium so I needed a different charger and went with an Elcon.
http://www.chargingchargers.com/quick-charge/obsc144-10.html
$400 + shipping (these things are heavy)
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top