Hello,
We are developing this BMS:
It is very small. Main features today are:
* Supports 5 to 16 cells.
* Balances up to 150mA.
* Does not need external power supply.
* Onboard FETs and current sensor up to 150A.
* Supports external current sensor up to 750A.
* Supports external contactors for load and charger.
* One onboard and two external temperature sensors.
* USART/USB/bluetooth/CAN communication.
* All voltages, temperatures and current are configurable via Windows app
* Status LED, buzzer
* Programmable inputs and outputs: heater, FAN, AC sense, contactor drive, ignition/enable, speed sensor input.
* Calculation of SOC and remaining distance.
* Onboard 5V DC/DC for bluetooth, current sensor and CAN isolator
* Tracked statistics, event log, bootloader for free firmware upgrades.
More info available here: https://www.energusps.com/shop/product/battery-controller-s516-150a-750a-36
With this post I want to ask you, DIYers, what other features should we implement for the product to be more attractive?
Currently we have feature request:
* More series cells or stackable solution.
We are working on that. But is there something else missing?
We are developing this BMS:
It is very small. Main features today are:
* Supports 5 to 16 cells.
* Balances up to 150mA.
* Does not need external power supply.
* Onboard FETs and current sensor up to 150A.
* Supports external current sensor up to 750A.
* Supports external contactors for load and charger.
* One onboard and two external temperature sensors.
* USART/USB/bluetooth/CAN communication.
* All voltages, temperatures and current are configurable via Windows app
* Status LED, buzzer
* Programmable inputs and outputs: heater, FAN, AC sense, contactor drive, ignition/enable, speed sensor input.
* Calculation of SOC and remaining distance.
* Onboard 5V DC/DC for bluetooth, current sensor and CAN isolator
* Tracked statistics, event log, bootloader for free firmware upgrades.
More info available here: https://www.energusps.com/shop/product/battery-controller-s516-150a-750a-36
With this post I want to ask you, DIYers, what other features should we implement for the product to be more attractive?
Currently we have feature request:
* More series cells or stackable solution.
We are working on that. But is there something else missing?