[EVDL] capacitor balancing
> Message: 3
> Date: Sat, 19 Feb 2011 12:16:20 -0800 (PST)
> From: Jack Murray <firstname.lastname@example.org>
> Subject: Re: [EVDL] capacitor balancing
> To: Electric Vehicle Discussion List <email@example.com>
> Message-ID: <firstname.lastname@example.org>
> Content-Type: text/plain; charset=iso-8859-1
> Actually, what is needed is a way to identify once any cell has reached max
> voltage, so it can then terminate the recharge
> of the entire string. The zener rating would then only have to handle the
> overvoltage during the time it takes to shutoff/bypass the regen into the
not sure if the balancing boards by maxwell has an led but I think one could
be added or something could be added to get a signal from the board when the
bypass circuit activates.. that signal could be used to control something
else like a circuit that then directs the regen into the batteries.
-------------- next part --------------
An HTML attachment was scrubbed...
| REPLYING: address your message to email@example.com only.
| Multiple-address or CCed messages may be rejected.
| UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub
| OTHER HELP: http://evdl.org/help/
| OPTIONS: http://lists.sjsu.edu/mailman/listinfo/ev