[EVDL List]

[quote]On Wednesday 18 February 2009 09:31 am, joe wrote:
> If the list
> doesn't want it, email me and I'll reply off-list with a pic attached.

I don't speak for the list, but I'd really prefer that you not send an
email to the list with an attached photo. Post it somewhere and send
the link in the post.

As far as where to post it, I'd recommend posting it on photobucket and
marking it public (whatever the exact words are) so that anyone can
view it.

Thanks for your consideration!

Randy Kramer
--
I didn't have time to write a short letter, so I created a video
instead.--with apologies to Cicero, et.al.

_______________________________________________
General EVDL support: http://evdl.org/help/
Usage guidelines: http://evdl.org/help/index.html#conv
Archives: http://evdl.org/archive/
Subscription options: http://lists.sjsu.edu/mailman/listinfo/ev

[EVDL List]

[quote] joe wrote:

> The guy that welded the setuop found them somewhere - I'll have to
> ask him,
> and I'll include a pic of the setup, if the list will accept it.

The list doesn't accept attachments of any kind.

> If the list
> doesn't want it, email me and I'll reply off-list with a pic attached.

Could you post it on line somewhere else, like on the vehicle's
EValbum page? Or a free photo-sharing site like Snapfish or
Photobucket or Flikr or... ?

Perhaps David Roden can post it on www.evdl.org?

>
> Joseph H. Strubhar
>
> Web: www.gremcoinc.com
>
> E-mail: xxx@xxx.xxx
>
>


--
Doug Weathers | "The Moon. I've been there. It's super!"
Las Cruces, NM, USA | - Astronaut Charles "Pete" Conrad
http://www.gdunge.com/ |

_______________________________________________
General EVDL support: http://evdl.org/help/
Usage guidelines: http://evdl.org/help/index.html#conv
Archives: http://evdl.org/archive/
Subscription options: http://lists.sjsu.edu/mailman/listinfo/ev

[EVDL List]

I'll do that eventually, anyway - but I thought some might want it sooner
reather than later, and it's going to take me some time to get it onto a
webpage. I'll try Photobucket, and we'll see if I can do that in a couple
days or so. When I get it up, I'll tell the list where it is.

Also I will post some pics of the Mustang in progress.

Joseph H. Strubhar

Web: www.gremcoinc.com

E-mail: xxx@xxx.xxx


----- Original Message -----
From: "Doug Weathers" <xxx@xxx.xxx>
To: "Electric Vehicle Discussion List" <xxx@xxx.xxx.edu>
Sent: Wednesday, February 18, 2009 7:05 AM
Subject: Re: [EVDL] Tilt Bed Hold Down


>
> [quote] joe wrote:
>
>> The guy that welded the setuop found them somewhere - I'll have to
>> ask him,
>> and I'll include a pic of the setup, if the list will accept it.
>
> The list doesn't accept attachments of any kind.
>
>> If the list
>> doesn't want it, email me and I'll reply off-list with a pic attached.
>
> Could you post it on line somewhere else, like on the vehicle's
> EValbum page? Or a free photo-sharing site like Snapfish or
> Photobucket or Flikr or... ?
>
> Perhaps David Roden can post it on www.evdl.org?
>
>>
>> Joseph H. Strubhar
>>
>> Web: www.gremcoinc.com
>>
>> E-mail: xxx@xxx.xxx
>>
>>
>
>
> --
> Doug Weathers | "The Moon. I've been there. It's super!"
> Las Cruces, NM, USA | - Astronaut Charles "Pete" Conrad
> http://www.gdunge.com/ |
>
> _______________________________________________
> General EVDL support: http://evdl.org/help/
> Usage guidelines: http://evdl.org/help/index.html#conv
> Archives: http://evdl.org/archive/
> Subscription options: http://lists.sjsu.edu/mailman/listinfo/ev
>


--------------------------------------------------------------------------------



No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.0.237 / Virus Database: 270.10.25/1958 - Release Date: 02/18/09
08:57:00

_______________________________________________
General EVDL support: http://evdl.org/help/
Usage guidelines: http://evdl.org/help/index.html#conv
Archives: http://evdl.org/archive/
Subscription options: http://lists.sjsu.edu/mailman/listinfo/ev

[EVDL List]

[quote]On 18 Feb 2009 at 6:31, joe wrote:

> I'll include a pic of the setup, if the list will accept it.

Sorry, the EVDL doesn't accept attachments. There are several reasons -- if
it's not clear and you want to know, email me privately; see below.

The canonical solution is to upload your file to a filesharing service and
post the link here. Yousendit.com and Mediafire.com seem to work fine. I
use tinypic.com for photos; they don't require any kind of registration.

David Roden - Akron, Ohio, USA
EVDL Administrator

[top]

= = = = = = = = = = = = = = = = = = = = = = = = = = =
EVDL Information: http://www.evdl.org/help/

[top]

= = = = = = = = = = = = = = = = = = = = = = = = = = =
Note: mail sent to "evpost" or "etpost" addresses will not
reach me. To send a private message, please obtain my
email address from the webpage http://www.evdl.org/help/ .

[top]

= = = = = = = = = = = = = = = = = = = = = = = = = = =


_______________________________________________
General EVDL support: http://evdl.org/help/
Usage guidelines: http://evdl.org/help/index.html#conv
Archives: http://evdl.org/archive/
Subscription options: http://lists.sjsu.edu/mailman/listinfo/ev