[EVDL List]

I'm looking for a sturdy plastic, fiberglass, or similar box that will
hold two GC2 batteries. Anyone have suggestions?


--
Willie, ONWARD! Through the fog!
http://counter.li.org Linux registered user #228836 since 1995
Debian3.1/GNU/Linux system uptime 79 days 2 hours 42 minutes

_______________________________________________
| Moratorium on drag racing discussion is in effect.
| Please take those discussions elsewhere. Thanks.
|
| REPLYING: address your message to xxx@xxx.xxx.edu only.
| Multiple-address or CCed messages may be rejected.
| UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub
| OTHER HELP: http://evdl.org/help/
| CONFIGURE: http://lists.sjsu.edu/mailman/listinfo/ev

[EVDL List]

Hey Willie,

I bought 3/16" black abs plastic from Interstate Plastics on Ed Bluestein in Austin.
I gave them the dimensions and they cut it up for free. I had to buy a 4x8 sheet for something
like $40-$50. I think you can get some kind of glue to "weld" the pieces together, but I didn't
do this. This may be more than what you want to do, but it's an option.

-ben


[quote] Willie McKemie wrote:

> I'm looking for a sturdy plastic, fiberglass, or similar box that will
> hold two GC2 batteries. Anyone have suggestions?
>
>
> --
> Willie, ONWARD! Through the fog!
> http://counter.li.org Linux registered user #228836 since 1995
> Debian3.1/GNU/Linux system uptime 79 days 2 hours 42 minutes
>
> _______________________________________________
> | Moratorium on drag racing discussion is in effect.
> | Please take those discussions elsewhere. Thanks.
> |
> | REPLYING: address your message to xxx@xxx.xxx.edu only.
> | Multiple-address or CCed messages may be rejected.
> | UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub
> | OTHER HELP: http://evdl.org/help/
> | CONFIGURE: http://lists.sjsu.edu/mailman/listinfo/ev


_______________________________________________
| Moratorium on drag racing discussion is in effect.
| Please take those discussions elsewhere. Thanks.
|
| REPLYING: address your message to xxx@xxx.xxx.edu only.
| Multiple-address or CCed messages may be rejected.
| UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub
| OTHER HELP: http://evdl.org/help/
| CONFIGURE: http://lists.sjsu.edu/mailman/listinfo/ev

[EVDL List]

[quote] Ben Jarrett wrote:
>
>
> Hey Willie,
>
> I bought 3/16" black abs plastic from Interstate Plastics on Ed Bluestein in Austin.
> I gave them the dimensions and they cut it up for free. I had to buy a 4x8 sheet for something
> like $40-$50. I think you can get some kind of glue to "weld" the pieces together, but I didn't
> do this. This may be more than what you want to do, but it's an option.

> > I'm looking for a sturdy plastic, fiberglass, or similar box that will
> > hold two GC2 batteries. Anyone have suggestions?

Thanks, I was going to pursue that. Then, I found:
http://is.gd/KsYhtP
http://www.ebay.com/itm/Dual-6-Volt-GC2-Size-Battery-Box-for-Boat-Marine
-RV-Renewable-Energy-Aerial-Lift-/200771507714?pt=Boat_Parts_Accessories
_Gear&hash=item2ebeea1602

--
Willie, ONWARD! Through the fog!
http://counter.li.org Linux registered user #228836 since 1995
Debian3.1/GNU/Linux system uptime 87 days 3 hours 57 minutes

_______________________________________________
| Moratorium on drag racing discussion is in effect.
| Please take those discussions elsewhere. Thanks.
|
| REPLYING: address your message to xxx@xxx.xxx.edu only.
| Multiple-address or CCed messages may be rejected.
| UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub
| OTHER HELP: http://evdl.org/help/
| CONFIGURE: http://lists.sjsu.edu/mailman/listinfo/ev