DIY Electric Car Forums banner

Wanted!

2K views 7 replies 2 participants last post by  Tedktis 
#1 · (Edited)
WANTED: Liquid cooling system for Zilla 1k, 600V 2/0 wire, charger box (to fit Zivan NG3), Controller box (that will fit Zilla, main fuse, contactor, etc), batteries (Have quotes for $125 @ 100ah shipped w/busbars/Bestgo from Carl at electriccarpartscompany, 2 yr warranty):eek:
 
#4 · (Edited)
sure....

by the way, you probably won't find a 'slap switch' handling 144v and 500+amps. One way to handle it is to run a choke cable thru firewall, and attach to your main circuit breaker pull.

I have some pix of what I did on my website, but other people have done it different ways.....
 

Attachments

#5 ·
sure....

by the way, you probably won't find a 'slap switch' handling 144v and 500+amps. One way to handle it is to run a choke cable thru firewall, and attach to your main circuit breaker pull.

I have some pix of what I did on my website, but other people have done it different ways.....
That sounds like a great solution What volt/amp circuit breaker do you recommend for a 144V Wap9 with 1k Zilla? Can I just use a Siemens from Home Depot or do I need to special order it. We are installing a 240 V 15 amp breaker and receptacle to power my air compressor on my circuit breaker box, so I figured maybe they have one that could handle the amps for my EV for a maintenance or emergency disconnect.?
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top