DIY Electric Car Forums banner

Hall effect throttle pedal from Ebay - be carefull.

9K views 3 replies 4 participants last post by  etischer 
#1 ·
I guess i'll have to throw away this one.

NEW Foot Pedal Throttle Cable (Hall Effect)

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=330273410493&_trksid=p2761.l1259

even thou seller, tncscooters , listed - 0v to 5v output signal, it turned out to be 0.7v to 4.8v, which didn't work with 0-5v setting of my Alltrax

Since I had to put a different connector on - seller doesn't want to accept return now. Well, it was't that expensive, but still hurts to trash brand new stuff.


Still looking for inexpensive throttle pedal working with Alltrax controller
 

Attachments

See less See more
1
#2 ·
Hi !

I have prepared a small circuit for you. If you connect your pedals signal to the input, you get a nice 0-5V Signal at the Output.

The parts for the circuit cost less then a bar of chocolate. You can use a TS912 or any other Rail-to-Rail Opamp.


Greetings,

Christian
 

Attachments

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top