DIY Electric Car Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-15 of 15 Results
  1. Member Classifieds
    I have some preproductions Landrover adapter plates available! Requires reusing the flywheel housing off the engine. has the nema b-face bolt pattern so works with hyper 9, warp, hpves, etc motors and leaf motors (gen1 and gen2+) with the additional leaf adapter plate...
    $400 CAD
  2. Member Classifieds
    adapter plate for the 1st gen leaf motors (em61) 6061 aluminum industry standard NEMA B-face bolt pattern (mates with all of our gearbox adapter plates, or anything made for the hyper 9 motor) ships internationally https://bratindustries.net/product/gen-1-nissan-leaf-em61-motor-adapter-plate/
    $375 CAD
  3. Member Classifieds
    im doing a small production run of some new parts, is there any interest in a adapter plate for the Mitsubishi outlander hybrid rear motor? the adapter plate will be made from 6061 aluminum and have a nema b-face bolt pattern. so a variety of gearbox adapters will fit. would enable matting...
    $300 CAD
  4. Member Classifieds
    as a addition to the universal leaf adapter plates and leaf couplers I make, I now have full kits for matting a em57 to a air-cooled VW beetle, bus, ghia, etc kit comes with mounting hardware and a blank leaf coupler kit utilizes the nema B-face bolt pattern ship anywhere...
    $1,000 CAD
  5. Member Classifieds
    Looking to buy a motor adapter plate, CANev or similar, to mate a Warp 9 or HPEVS AC-50 to a 1996 Miata. Shaft mount hub for flywheel wanted as well. Thanks Bill wstein25@gmail.com text 413-687-3249
    $975 USD
  6. Member Classifieds
    universal adapter plates for the 2012+ (Em57) Nissan Leaf motors features a NEMA B-face bolt pattern for easily adapting to other gearbox’s and transmissions. machined from 6061 aluminum 375$ CAD and leaf motor couplers. fits both Gen1 and newer motors (em61 and em57) made from 4140 chromoly...
    $250 CAD
  7. Member Classifieds
    Selling this adapter plate for $500. Buyer pays shipping. I only accept payments via PayPal. The coupler has a piece inside it that fits onto any motor shaft that is 1.125 inches in diameter. The piece is removable if desired. The key is also included. If you live locally, I will also be...
    $500 USD
  8. Technical Discussion
    Adapter Plate 1980 Fiat Spider Hello Everyone! New to the forum - what a great group of helpful people! I am in the planning stage of a 1980 Fiat Spider conversion and the first big challenge is to figure out how to get an adapter plate for the motor to trans. The motor/drivetrain plan so far...
  9. Technical Discussion
    Hi there, I have been looking in to the possible 'homebrew' ways of coupling my motor to the transmission, but have decided that it would be best to go down the route of finding a machinist. does anyone in Essex have any suggestions for a good machinist/ CNC company maybe that specialises in...
  10. Member Classifieds
    VW Bug Adapter Plate and Shaft Coupler I pulled these from my now defunct Emoli Bug. There are some pictures in this thread from Endless Sphere. A some point I tapped a second set screw so that the coupler can work for both long and short shaft...
  11. Technical Discussion
    To get an adapter so precisely as possible, I would love to take blueprints / drawings of motor and transmission with exactly dimensions but I can't find them or no where to find. An exact measurement is quiet difficult to get the last hundredth. So my questions are: How do you build your...
  12. Technical Discussion
    I'm looking into machining my own adapter plate and was wondering if anyone has (or knows a source that has) the exact hole dimension/layout for the bell housing where the ICE motor was originally mounted. If I just email a place that makes the adapter plates for this model car, will they give...
  13. Technical Discussion
    I'm planning on designing (using SolidWorks) and machining (CNC) an adapter plate to transmit the rotational motion from the electric motor to the old VW transmission. Right now I don't actually have the VW but I plan to get it soon. I just want to know the important things to keep in mind...
  14. Technical Discussion
    Hi, I'm searching for a technical paper or CNC-data to build an adapter plate for my Volkswagen New Beetle. A drawing like this in a better resolution and with measures would be a good start: I wrote to Cameron but got no reply. Perhaps anyone knows someone who is building a similar...
  15. Technical Discussion
    Hi all !! Does anyone have drawing / plans for building adapter and coupler for VW aircooled engines with clutch/flywheel? If anyone has detailed drawings of the transaxle (bellhousing) I would apprechiate this as well. I live in Norway, and shipping & import tax are threatening the survival...
1-15 of 15 Results
Top