DIY Electric Car Forums banner

battery

  1. Batteries and Charging
    Hello, I am working on a project to reduce the charging time for battery. but there are no simulations available for CCCV. multistage ,pulse or boost charging. can anyone help me with this?
  2. Electric Motors
    Hey folks I'm new to the forum so sorry if I posted this in the wrong subtopic. I'm looking to convert a 2010 Ford Escape with a 5-speed, and I've narrowed down the motor and battery combinations to three. A Netgain Hyper9 (not high voltage) and 8 tesla model s modules 4s2p configuration A...
  3. Classifieds
    Up for sale are 16 Kokam SLPB98188216P battery cells. These are incredibly high power cells that are able to discharge up to 900A each! This would be a perfect set of cells to make a super light weight 12V, 24V, 36V, 48V, or 60V pack in 1P configuration with extremely high power output. I...
  4. Classifieds
    Hello, min looking for the bms wiring harness for the Gen2 volt battery. Don’t need the bms, just a intact harness. Also looking for the coolent ports/end plates for the battery as well cheers
  5. All EV Conversions and Builds
    Gearing up to convert an E46 Touring this winter, using a GS450H Gearbox and inverter. However the 10 Tesla Model S modules I'm also going to use, each have a voltage of 23.2, giving me a total of 232v, whereas the inverter needs a 280v minimum. Is there a way to boost my pack voltage that...
  6. Classifieds
    I have a dozen modules out of my wrecked 2016 Tesla Model X 90D (odometer unknown). I'm selling all 12...I only want to deal with this once vs sending out one at a time to people. The car went into a tree or pole, dead center and at very high speed from what I can tell and a few of the plastic...
  7. Batteries and Charging
    I'm planning to build myself an electric car. Due to the cost of Li-ion batteries, i would like to build myself a hi-density rechargeable, battery or fuel cell. So far, i have read about carbon based battery, salt, direct methanol fuel cell etc... which one would you recommend ?
  8. Classifieds
    Local pickup only in Broomfield, CO. $95/battery OBO We have 250 total NEW CALB model CAM72 batteries. Never used, stored in climate controlled warehouse. Each cell provided with one cell connecting link CALB busbar. WE ACCEPT PAYMENT THROUGH ESCROW.COM
  9. Batteries and Charging
    Hello All, I am currently looking to purchase a battery, BMS and charger for my conversion project and am considering using EIG C020 cells. I would be interested in people’s opinions, advice and experience from their own builds, particularly with these cells. I require 120V nominal voltage...
  10. Classifieds
    Bought it on this form about a month ago and never got around to install it. Would like to get my money back. $800 plus shipping. Located in San Jose, CA
  11. Classifieds
    Hi everyone, For sale: Nissan Leaf 2011-12; 500wh module with 75% SOH - 110$ Nissan Leaf 2015*; 500wh module with 90% SOH - 140$ Kia soul 2016; 48V 5kwh usable module - 1600$ Model S modules 5.6kwh SOH 96.4% - 1850$ Volt 2011-15 (2kwh-12S) modules - 700$ Volt 2016-18 (18kwh) Complete...
  12. Classifieds
    Hello folks! I have got a pair of factory Ford Ranger EVs, one of which I am attempting to "restore" and get back on the road! I'm looking for a high voltage pack to do a Lithium swap on the white truck. As a young (22 yo.) EV enthusiast, I don't have a ton of money to spend, so I am on a bit...
  13. EV News
    I am looking for a complete CAD assembly(Solidworks File would be the best) of Mustang 1969. We need to convert the same to Electric one.
  14. Batteries and Charging
    I am moving across the country soon and was hoping to get some advice on what I should do with my 5 Tesla Model S modules. These are my options at the moment: 1. Carry in my primary vehicle during road trip (leaning towards this). 2. Store in donor vehicle which is being shipped (not insured...
  15. Technical Discussion
    Greetings to everyone, I was researching Tesla's batteries and found that they use Mica Shields to cover the top and the bottom of the battery modules. However one strange thing I have noticed was, the thermoformed transparant cases had this circular shapes and same shapes were used on Mica...
  16. Batteries and Charging
    I have previously purchased a Delta Q QuiQ Charger, and I am now in the market for some lithium packs. I was looking at the LG Chem batteries, which have a nominal voltage of 60.8v and have a 45Ah capacity, so about 2.6kW. The QuiQ charger is a 72v designed for lead acid, but the chemistry can...
  17. Batteries and Charging
    Hello, recently I was presented an opportunity to build a 80kWh backup battery system for a friend of mine. I'm thinking for in both terms of longevity and in cost I am planning on purchasing 15 Tesla Model S Lithium Ion Battery Modules equipped with liquid cooling from EV West. I have been in...
  18. Batteries and Charging
    I'm looking into using a Tesla motor for a time attack car and are having questions regarding what batteries and how many it is going to require. My current plan is to use the batteries from a Chevy Volt to run the motor but I am looking for other options. The Chevy Volts battery bank is a...
  19. Batteries and Charging
    So, first off, I'm new to the forum and I've been lurking for a while. I have saved about 10k for my first EV project. I will be converting a 1974 Chevy Vega. This car is about 2100lb stock. I plan to shave about 300lb off of it before the conversion. I've decided on this motor (144v)...
  20. Batteries and Charging
    Hi! Battery Management Systems (BMS) have been used for a while and I'm sure that there are quite a few good options in the market, but do they meet our needs? Trying to understand the real needs from the community, i'm here today to investigate about what clearly isn't a simple question...
Top