DIY Electric Car Forums banner
bms
1-20 of 85 Results
  1. All EV Conversions and Builds
    Hey guys looking to sell the BMS controller, Asking $1150, thanks
  2. Batteries and Charging
    I am planning on converting a ford ranger (2005 ish) into an EV, in my area it is quite easy and affordable to find used nissan leaf motor stack for quite cheap. To controll these components i planned on using a resolve controller to make all the components work together. My problem is that I...
  3. Batteries and Charging
    I was working on a system of SIMP BMS with BMW i3 modules and a Victron inverter. Now, I have to stop using Victron inverters and use trumpf AC-DC, DC-DC, and system control units in addition to SIMP BMS along with BMS i3 modules. The Victron had DBC files that I was able to convert into CAN IDs...
  4. Batteries and Charging
    I'm currently interested in converting a small speedboat to electric, using this 40kw peak brushless electric motor. The plan is to run it on around 100v, using the 50kv variant of the motor to produce our 5000-6000 RPM desired. This motor is 40KW peak, and around 25KW constant so the battery...
  5. Parts Vendors
    Hi everyone, I bought this kit for recreate the same size capacity like this vlog/blog series from Beginning from this Morning. I really recommend checking the video series about the battery system and solar system for understanding the setup. You can program the BMS for your cell chemistry off...
  6. Technical Discussion
    I am working on a electric kart project. I'm slowly piecing together stuff. I'd like to use a Chargery BMS and contactor with a Alltrax SR controller. But struggling with the contactor coil wiring. The Alltrax seems to want everything to go through a footswitch to initially "turn on" the...
  7. Technical Discussion
    Hello, I am looking at purchasing a Chevy Volt battery to power a (slightly suped-up) go-kart I am working on. I have the ability to either buy an entire Chevy Volt battery with factory BMS or go with the SIMP BMS or even go down the path of integrating the Batrium Watchmon 5. I am planning...
  8. Classifieds
    Looking for 20 oem Tesla battery module bms boards
  9. Controllers
    Hello, in our school , we are trying to turn a vehicle into an electric car. We are trying to connect and program the Orion BMS. We can’t set a profile , or when we succeed. There is an automatic message that says that the wiring doesn’t work. Thanks
  10. Batteries and Charging
    I'm in the midst of a EV boat conversion. Getting ready to order batteries and BMS. The batteries will be Lifepo4, 2P30S, 96 volt, 280ah each, 50+ kwh total. I'm thinking the BMS should be separated one per series group. i.e. one 30s BMS on each side. If one BMS trips out (low cell or something)...
  11. All EV Conversions and Builds
    Long time lurker first time poster. Considering a Audi A6 C6 conversion. wiki page Reading metricminds blog on a audi quattro conversion has got me more serious about it. blog As I like the idea of AWD for sand and gravel. Also because there is one available near me for aud$3000 with a dead...
  12. Batteries and Charging
    Hi, I am using a Hykon LIFEPO4 battery pack. I want to communicate with the battery using arduino to read its parameters. I have sent my CAN message as follows, Frame ID : 0x018c0ef4 (System Information frame 1) DATA: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 ( All data zeros as specified)...
  13. Batteries and Charging
    Hello! A novice here looking for some answers. I'm just working out my cooling system. I'm using Tesla Modules which are liquid-cooled. I'm planning on using ThunderStruck Motors BMS and charging system. I've got an EVnetics Motor Controller for my DC motor that also needs liquid cooling...
  14. Technical Discussion
    Hi, I have a Nanjing Pengtu PA3K3W360FX10, 3.3KW electric car charger that I am trying to use with an Orion BMS 2. Both the charger and the BMS have CP and PP lines. I was wondering how these lines would be connected? I assume they can not just be paralleled. Does anyone have experience with...
  15. Classifieds
    Hello, min looking for the bms wiring harness for the Gen2 volt battery. Don’t need the bms, just a intact harness. Also looking for the coolent ports/end plates for the battery as well cheers
  16. Batteries and Charging
    Hello All, I am currently looking to purchase a battery, BMS and charger for my conversion project and am considering using EIG C020 cells. I would be interested in people’s opinions, advice and experience from their own builds, particularly with these cells. I require 120V nominal voltage...
  17. Classifieds
    Bought it on this form about a month ago and never got around to install it. Would like to get my money back. $800 plus shipping. Located in San Jose, CA
  18. Batteries and Charging
    Hi Does anyone here have experience with this 96s BMS? http://www.bestechpower.com/communicationbms/BMS-D170V1withRelay.html I want to convert my car to electric using a large (96s ~50p) battery pack of recycled 18650 batteries. Would this BMS be suitable? What balancing current does it have...
  19. Classifieds
    Brand: GBS Cells: Set of 92 cells + BMS GBS100 - good condition - good for projects - been in storage and kept charged, never been used Pick-up: Los Angeles Price: US$ 3000
  20. Classifieds
    Brand: Voltronix Cells: Set of 45 cells + BMS 200 AH - LFP200AHA - great condition - hardly used - managed well - came out of a working car Pick-up: Los Angeles Price: US$ 5000
1-20 of 85 Results
Top