Hello, I am looking to purchase a second one of these as it has worked faultlessly, but it seems Brusa are no longer supplying them direct.

Hi everyone! I'm a member of the charging team at Ontario Tech University's FSAE team in Ontario, Canada and we are trying to implement a new method to monitor our cells. We want to use one of the programmable digital output pins (pins 5-7 I believe) to power a TI TivaC, but for some reason the...

Hi everyone! Just joined this forum since there seems to be a bunch of insanely knowledgeable people here! Anyway, I was wondering if anyone knows how to program the digital output pins of the Brusa NGL513 charger so that they output 5V. Just straight 5V, no actual data. I'm trying to power a...

Hello from south of France. I am searching a Separately Excitated Motor Controller for a 96V sepex motor. It's easy to find/48/72/80 V, but difficult to find for 96V sepex motors. This motor is the original motor of the Electric Piaggio Porter, a EU version of the Daihatsu Hijet electric...

I had a Brusa NLG511 come in for repair. Symptoms: Would not charge, power LED just blinked. A quick bench test showed it had a short on the +15V supply... I could not located which part was shorted, so I hooked up the external supply and set it to +15V... And slowly turned up the current...

I had a Brusa NLG513 Charger come in for repair with the following error message: ShortCirc PwrSt: ERR So obviously it has a short circuit in the power stage. ;) So I took it apart and checked all the IGBTs and diodes in the power stage... All tested good... I then contacted Brusa to see...

I recently acquired a Brusa NLG511 battery charger, which is the correct voltage range for my truck. I have had a Brusa NLG513 battery charger for a few years, but its output is to high for my truck. And I wanted to see if I could convert the NLG513 to a NLG511. So I was really hoping that...

All the repair pics: http://www.wolftronix.com/amc325_1493_2/index.htm The video playlist: http://www.youtube.com/playlist?list=PLQdu_G7xyFISR4r6oFFY9HTKPVMPjFQMV This could be part of the problem... ;)

Solectria AMC/UMOC Test Box is a tool used to diagnose problems with the motor/controller or vehicle side wring/switches/pots. Tutorial on how to use the Solectria AMC/UMOC Test Box: http://youtu.be/5kMk4QwHiJ0 Time Lapse building the boxes: http://youtu.be/xd3NPSV2DL4 Because people like...

Hi all, I have a NLG 514 for sale. Unit has been used a litle but is in very good condition. I'm seling it for £500. Best offer is welcome. It is a 720VDC, 3.3kW Full details updated...

For Sale: Solectria (Brusa) AMC RS422 to RS232 Serial Adapter I just built up another batch of Solectria (Brusa) AMC RS422 to RS232 Serial Adapters. This serial adapter is required to connect a laptop via RS232 serial port to the RS422 monitor/debug/programming port on Solectria (Brusa) AMC...

Do you have some old non functional Solectria or Brusa parts sitting around the basement or garage? I will buy them, and/or repair them if needed. List of parts repaired: http://www.wolftronix.com/EV.htm Thanks, Wolf

I've been happy with NLG 513 so far and I do get a rare error SDT Batt VoltHi constantly at around 376V. http://lithiumate.elithion.com/php/brusa.php I've Nissan Leaf full pack and Leaf BMS connected. Brusa doesn't like it after 370+ volts. I've disconnected all the traction battery input...

Brusa NLG503 1.6kW charger for sale. The charger has been used for around 3 years but it still in excellent working condition (I am upgrading to a 3kW charger). Charger features include: -Up to 1.6kW operation -Programmable charging modes for intelligent charging -CANBUS control for digital BMS...

Hi all, I am trying to charge a 350V Li-ion battery from enerdel with NLG512 charger. This is my first experience charging a battery for EV, so problems expected but it's bit frustrating from the beginning. The charger is connected to the mains 208V and the monitoring program shows it has...