DIY Electric Car Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-17 of 17 Results
  1. Member Classifieds
    Hi EV community - I have decided to sell my Porsche conversion as I am starting on another project. I purchased the Porsche from Arizona in '21. Key EV features : 9" series wound Advanced DC motor Zilla 1K Controller -- liquid cooled Porsche/VW adapter plate + hub + stage 3 clutch (less...
    $12,000 USD
  2. Batteries and Charging
    Hi everyone, I am working on a custom project and want to buy some pins, male and female, to suit the 12 gauge (6mm^2) cables used in EV chargers. I can't seem to find anywhere that sells just the pins. I am prepared to crimp/solder them myself but everywhere I look just wants to sell me an...
  3. New Member Introductions
    Hi, I'm an older guy with lots of electronics experience, some solar experience and 2 electric cars. I'm looking for help solving the following global environmental problem, starting with our own little problem: Sounds simple, and done-that-already, but it's not, unless I'm just wrong, it's...
  4. Technical Discussion
    Hi, I have a Nanjing Pengtu PA3K3W360FX10, 3.3KW electric car charger that I am trying to use with an Orion BMS 2. Both the charger and the BMS have CP and PP lines. I was wondering how these lines would be connected? I assume they can not just be paralleled. Does anyone have experience with...
  5. Member Classifieds
    NEW EVSE K25-50A 12kW High Power Level 2 RGB LCD OpenEVSE Waterproof Outdoor Charging Station For Sale I have a Premium 50A 12kW High Power OpenEVSE completed kit for sale with a Custom 52A J1772 25 foot cable using a 63A plug. Its running OpenEVSE’s v.4 board with built in current reading...
  6. Batteries and Charging
    I am looking for the best connector for DC fast charging. It looks like CHAdeMO is on its way out and a new standard has arrived; the SAE Combo which combines the J1772 with a DC, level 3 connector. It is very new so although there are some charging stations with the combo plug, I have not...
  7. Member Classifieds
    High Power 9.6kW Electric Vehicle Charging Station for sale I bought a 2013 Nissan LEAF and love it! I have a heavy electrical background and was inspired when I saw some DIY units for sale here. I apologize to those who have already read the following before, I finally had to turn the...
  8. Batteries and Charging
    Hi all, I'm doing a complete rebuild on a different Geo Metro using most of the same components (6.7" ADC, 1231c, pb-6), but moving to lithium batteries. I was using individual Soneil chargers for my 96v lead acid pack but obviously that won't be an option. Here's what I'm getting at...
  9. Parts Vendors
    Hello all, I'm Dorian, an engineer guy with Electric Motor Werks - producer of the JuiceBox 15kW charge station. In case you didn't already know, the JuiceBox is a full-featured J1772 charging station which supplies up to 60A 15kW (operating on 100-240V) to your J1772 vehicle. To sum it up...
  10. Member Classifieds
    SOLD: Current Ways J1772 EV Battery Charger 3kW 225v-450v IP67 Air Cooled **ITEM IS SOLD*** This is a Current Ways J1772 compatible battery charger for electric vehicles. The charger was used for approximately 1 year and was removed from a known-working environment. Wiring harnesses for...
  11. Batteries and Charging
    After installing two EVCharge cables, we decided to publish some information about this project to benefit the EV community. The initial photos of our work can be found here: http://gwl-power.tumblr.com/tagged/EVCharge The J1772 cable details are documented here...
  12. Member Classifieds
    I am the creator of an open-source j1772 dummy inlet that I posted on the thingiverse, recently I had someone show interested in purchasing this from me. I wanted to let the community know that I have more available at a realistic price. 25 USD$ plus shipping. This is blue glow-in-the-dark...
  13. Member Classifieds
    I bought this in 2012 and used it a few times. It requires a 40 Amp breaker and worked well but I couldn't permantly install it because my electrical panel is only rated for 50 amps and I already had a 30 Amp dryer load on that panel. I am now using a Clipper Creek 20 Amp model. Here is a link...
  14. Batteries and Charging
    Hi! Most available J1772 vehicle inlets seems to be designed for mounting behind a bigger lid. This includes this one: http://evconnectors.com/electric-vehicle-chargers-and-accessories/Type-1-Electric-Vehicle-Charging-Cables-and-Sockets/j1772-16-amp-socket-Inlet-dsi-ev16s-nc It extends about...
  15. Batteries and Charging
    I've got an AVC2 from modularevcomponents.com and a generic 75a socket. The charger is a reprogrammed ng3, pulling about 12a from the mains. On an older clipper creek, everything works fine. On a Chevy volt station, it starts charging, gets to 11a to the pack, them errors out the evse. On a...
  16. General DIY Electric Car Discussions
    I have a dirty secret, I like free stuff and I think you do too. Lately I find myself charged on public charging. No, I technically rarely "have-to" use the thin boxes popping up all over town. I've had facility folks come over twice now to tell me, "Those spaces aren't open!" I fluff my...
  17. Member Classifieds
    SOLD!! This came with the car I purchased and we will likely never get any public Avcon chargers here so it needs to go. Has a pigtail on it for 3 wires and I believe it is modified to send the signal back to the outlet so it always charges.
1-17 of 17 Results
Top