DIY Electric Car Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. Technical Discussion
    Can anyone give me a pointer. Just finishing my build 100v Netgain and Orion BMs plus 5 tesla modules. Seems the current software wont let the Netgain talk to the can network so. When regen kicks in and the cells are almost fully charged it knocks out the charge enable relay on the BMS which is...
  2. Controllers
    Hello, in our school , we are trying to turn a vehicle into an electric car. We are trying to connect and program the Orion BMS. We can’t set a profile , or when we succeed. There is an automatic message that says that the wiring doesn’t work. Thanks
  3. Batteries and Charging
    ---SOLVED--- Thanks for all the help Hi everyone, I have an Orion BMS revision E and I'm having trouble connecting the BMS over CAN bus. I have the CANADAPTER that's supplied with the BMS from Ewert Energy. I've contacted Ewert Energy about my problem, but I figured I'd post to the forums and...
  4. All EV Conversions and Builds
    Your skill level with auto mechanics and fabrication: Medium, I know how to buy raw materials from home depot and turn them into hinges/platforms/etc. I know how to crimp and solder and keep myself from getting electrocuted. The range you are hoping to get (how many miles/charge) 40 miles /...
  5. Technical Discussion
    I have a 92 civic with 144v of 180ah new Calbs, Orion BMS, Zilla 1K, ElCon 5k charger. I have lately had potbox trouble (pb-6) and replaced with new pot. The new pot isn't smooth either. I am also having problems trying to achieve DCL control over Zilla output. I can pull current sensor off...
1-5 of 5 Results