DIY Electric Car Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
53 Posts
Discussion Starter · #1 ·
We (Stu and I) disconnected the axle from the outer CV joint (basically disconnected the axle from the wheel). The only thing left connecting the engine to the car were the engine bolts . We connected the lift, removed the engine bolts (holding the engine from the frame) and started to lift. The passenger side started coming up higher than the driver which didn't seem right. Also the intake manifold hit the frame. We ran out of time. But at least we're doing something interesting.
 
1 - 1 of 1 Posts
Top