DIY Electric Car Forums banner
1 - 1 of 14 Posts

· Registered
2,162 Posts
Put a resistor in series between the vehicle charger and the pack.
That actually is hairbrained :) OP has limited charge power available and you are suggesting turning half of that into heat.

OP. 6 amps is the least specified by j1772 EVSE AFIK, but your charger can draw as little as you like, the EVSE won't care as long as you don't exceed the 6 amps or whatever it is advertising in the pwm duty cycle.
1 - 1 of 14 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.