DIY Electric Car Forums banner
1 - 1 of 7 Posts

· Registered
1 Posts
Yes, this is a 12S 8P module. Not really a pack.
The module has a balancing board but not a BMS.
These were used 13 modules to a pack, in the day. The pack had a BMS.

Each cell (or group of 8 cells in parallel) can be charged up to 4.00 volts. So the module can get up to 48V, but it is safest to not go too much past 40V.
For charging you should monitor the voltage each charge, or limit the voltage of the charger.

Lots of power. With great power comes great responsibility.
1 - 1 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.