DIY Electric Car Forums banner
1 - 20 of 28 Posts

·
Registered
Joined
·
10 Posts
Discussion Starter · #1 ·
Hi all. I just bought 2011 Peugeot bipper . It's a non runner at the minute. It's a conversion done by allied electric. It has a part missing that's mounted beside the ansaldo inverter, it takes a 56 pin plug. Does anybody know what this part is. Or even have one .thanks
121738
 

·
Registered
Joined
·
25 Posts
Ill post link here , Only realised ithe stuff I have is actually from a micro vet. It still shares the ansaldo motor and inverter .I know someone who broke one of these but I think it was the berlingo/partner version. I will check and see. micro-vett
 

·
Registered
Joined
·
10 Posts
Discussion Starter · #11 ·
I tried to charge the battery but they are to flat. I have the entire van just missing bms. I got it as a project for me and my son but we have since build a electric go kart. Find me on facebook and I'll send you a video
 

·
Registered
Joined
·
20 Posts
I tried to charge the battery but they are to flat. I have the entire van just missing bms. I got it as a project for me and my son but we have since build a electric go kart. Find me on facebook and I'll send you a video
Hi again, sorry late in replying, thank you for your reply.
Did you charge the batteries whilst in the vehicle (just plugging the car in)
Or try each cell individually?
That's good, the whole van except the BMS.
Do you know what KW the motor is?

Kind regards
 

·
Registered
Joined
·
20 Posts
Hi again, sorry late in replying, thank you for your reply.
Did you charge the batteries whilst in the vehicle (just plugging the car in)
Or try each cell individually?
That's good, the whole van except the BMS.
Do you know what KW the motor is?

Kind regards
O and I forgot to ask where are you located.
And what sort of price would you be looking at for the bipper?
 
1 - 20 of 28 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top