DIY Electric Car Forums banner

Bricked Synkromotive Controller

2085 Views 1 Reply 2 Participants Last post by  frodus
Hello all,
So my group recently updated to the latest firmware on our beta version of the Synkromotive controller. After we updated, with confirmation from the controller that it was successful, our car would no longer start. We restarted the controller and then lost communication with it upon startup. Fortunatly we had another controller that we were able to use so we are not stranded, but I was wondering if anyone knows a way to unbrick these controllers? It seems if no hardware is broken there must be a way to fix it.

Any help would be appreciated,
1 - 2 of 2 Posts
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.