DIY Electric Car Forums banner

Charging Circuit Help Please!

5590 Views 4 Replies 5 Participants Last post by  Bruce_Kenobi

I am building an electric scooter, which is powered by 4 6volt, 4.5amp rechargeable lead acid DC batteries (, wired in series to produce 24volts (18amps). I am planning to use an inbuilt charging circuit, which plugs into mains power (240v AC) and charges the batteries with 24v DC. It would also be helpful if an LED turned on when the batteries were fully charged. However, I am unsure of the appropriate circuit for this. Could someone please post a circuit diagram for this, or email it to me ([email protected]), or direct me to a site which can help.

Any assistance is much appreciated!
1 - 1 of 5 Posts
1 - 1 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.