[omonoid]

I used the schematics from Gav's helpful website as a base, and changed a few things to match my build.

One problem with mine could be that my pot box (pb-5) doesn't have a micro controller, so i cant run the KSI relay through it. Instead i just plan on wiring it straight to ignition does that work?

Also i have a fan that normally runs off an outlet to use for trunk battery ventilation. I planned on wiring that directly to the charger so when the charger is plugged in the fan turns on. I may use a standard surge protector to link the fan, 12v battery charger and charger. Is that ok??

Thanks

 

[omonoid]

yeah i dont think you can buy surge protectors rated differently so im just wondering if a standard one works or not

 

[omonoid]

Oh your saying the charger should be on a different circuit? That makes sense.

 

[omonoid]

yeah. Ill re-draw it a bit and post up a revised version.
Thanks!

oh and that black wire on the controller is the ground i didn't really know what to attach it to

I wrote precharge cause i was going to put a resistor between the contactor's terminals, and didnt know how to write it.

I have no experience making schematics so sorry for its roughness