Joined
·
5,367 Posts
What's the other side of the board look like?
Component ID from Leaf Gen 2 OBC Control Board?
Does anyone know about this P1517 thing, and What does the "P" reference designator mean, and what are the "D" and "N" positions of this component? Never seen anything like it.
![Font Audio equipment Electric blue Computer hardware Electronic instrument]()
![]()
1 - 4 of 4 Posts
Joined
·
51 Posts
No resistance across the D and N side of both P104 and P1517 components. They're both connected together somehow as well.
These are only connected to Pin 21 and 23 of CN100. Out of those two pins, Pin 23 only has a wire back to connector F23 pin 18. Red/black stripe which is +12V Battery.
Since the two terminals have continuity Pin 23 of CN100 is also connected to D102 (to the top right of P104).
Here's a picture of the otherside:
![Passive circuit component Circuit component Hardware programmer Microcontroller Electronic engineering]()
These are only connected to Pin 21 and 23 of CN100. Out of those two pins, Pin 23 only has a wire back to connector F23 pin 18. Red/black stripe which is +12V Battery.
Since the two terminals have continuity Pin 23 of CN100 is also connected to D102 (to the top right of P104).
Here's a picture of the otherside:
Joined
·
51 Posts
On the backside of the board there is another component P105. Has the markings: some X symbol with 150F and 24V.
These P components are referring to fuses. https://www.allaboutcircuits.com/electronic-components/datasheet/MINISMDC150F/24-2--TE-Connectivity/
P105 is a ressettable fuse with specs below.
![Circuit component Hardware programmer Electronic component Electronic engineering Audio equipment]()
![Font Parallel Pattern Rectangle Number]()
These P components are referring to fuses. https://www.allaboutcircuits.com/electronic-components/datasheet/MINISMDC150F/24-2--TE-Connectivity/
P105 is a ressettable fuse with specs below.
1 - 4 of 4 Posts
