DIY Electric Car Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Recently got a Meanwell HRP-600-12 DC converter. After talking with a Meanwell rep, I was told that the output side pulls to ground when no power is applied to the input side. This effectively "shorts" the 12V battery when powered off. Has anyone had this issue? Do you just put power diodes in series with the positive leads of the output of the DC converter?
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top