DIY Electric Car Forums banner

DC Plasma's first Speeding Ticket 155mph

25703 Views 32 Replies 9 Participants Last post by  epyon
DC Plasma raced the Texas Mile today and ran a 134mph in the 1/2 mile and 155mph in the full mile. From a standing start. You can see the first uploaded video by Mike Dunn here.

http://www.youtube.com/watch?v=I6x-zCkYPL0&list=FL9pAXoc92fS7PtTrXudLJ1A&index=1&feature=plpp_video

Kind of neat from second 44 to 55 the jet engine sound of the run.

We ran at 210motor volts on the new helwig brushes.
Stock netgain motors otherwise. and a single zilla and half rated battery current at 1200 amps.


John Metric
DCPlasmaRacing on Youtube (please subscribe)
LoneStar EV Racing Team on Facebook (please subscribe)
Facebook Build-Thread Racing Slalom
DIYElectricCar Garage Build-Thread
Pennocks Fiero Forum
979-665-5621
See less See more
1 - 2 of 33 Posts
This is the run chart from the 155mph run. See the overdrive shift in the middle. We ran at 1200max amps on the battery where the factory rating is 2500amps max.
Hi John,
Could you email me the hex file for this run. I looked at the 1/4 mile file you sent earlier: the motor current and voltage work out, but I don't have a good handle on battery voltage yet. The internal resistance must depend strongly on battery temperature. I'll post graphs soon.
Gerhard.
Hi John,
Could you email me the hex file for this run. I looked at the 1/4 mile file you sent earlier: the motor current and voltage work out, but I don't have a good handle on battery voltage yet. The internal resistance must depend strongly on battery temperature. I'll post graphs soon.
Gerhard.
Do you monitor battery temperature? If so, can I see the numbers.
Work has me crazed, but this project persists.
Gerhard
1 - 2 of 33 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top