Joined
·
5,826 Posts
No idea. Real rifle shot expecting anyone here to be familiar with a small floor sweeper motor.
Pictures might get you some ideas...
Pictures might get you some ideas...
Posts by remy_martian
1 - 4 of 11 Posts
Joined
·
5,826 Posts
What's the bearing end you're hiding 😂 look like?
Joined
·
5,826 Posts
No...I meant the OTHER bearing. There are two...
A pic of the housing face the rotor is still stuck in. This face:
![Automotive tire Tire Rim Nickel Composite material]()
A pic of the housing face the rotor is still stuck in. This face:
Joined
·
5,826 Posts
Looks like you can press it out from this side...a lot easier than pulling.
You may know this already, but do not whack on the shaft to get it out unless you plan on replacing the bearing. A shop press will do it; if you don't have one, an automotive machine shop does.
You may know this already, but do not whack on the shaft to get it out unless you plan on replacing the bearing. A shop press will do it; if you don't have one, an automotive machine shop does.
1 - 4 of 11 Posts
