DIY Electric Car Forums banner

Elcon PFC 1500 and Elithion BMS wiring help

4140 Views 4 Replies 3 Participants Last post by  frodus
I'm ready to hook up my BMS with my Elcon charger. However the elithion manual provides information which is different from what i see. The manual also suggests getting a custom built circular connector from some company and then explains pinouts based on those.

Im unable the get pinouts of the circular connector on my elcon. However, Ive heard that the newer elcons have a NC/NO circuit built in (like the two wires you see in the pictures below)

Can somebody provide a real life experience and working diagram (rough). What do I do with the 5V input on the charger?

Is it mandatory to use the circular connector on the charger? If yes can somebody provide a pinout so I can match it to the elithion BMS manual? (Elcon's datasheets do not have this pinout!)

Thanks

Attachments

1 - 2 of 2 Posts
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top