DIY Electric Car Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
80 Posts
Discussion Starter #1 (Edited)
All items are used, I got them with a set of which I used the controller, motor and cabling

Kelly/ZJW 200A/12V contactor

The contactor weighs about 700g, so I'd prefer shipping within the EU (€9.00, yes, that includes UK
), but worldwide is only €12.25.
Details can be found on the Kelly site.
I'd like €25.

GEFRAN GS40A SSR
The SSR weighs 200g (I'm throwing in the heat sink), shipping is €5.50 EU or worldwide and cheaper if sent separately (thanks An Post
) I might get away with the above if I leave the nuts and washers off the contactor. RS has some details.
Note: the SSR is zero-pass, AFAICS it will only work with AC loads!
Also €25. I'll do €40 for both.


Cacti / Huawei DC/DC, 300W, 13.5V
Solid DC/DC, see pictures. ~2kg.
€50.




5A / 175V charger,

looks very similar to this Kelly Charger:
http://kellycontroller.com/c96v10a-1200c-charger-p-1294.html
€150



Shipping possible at actual stamp cost. SEPA or PayPal, if necessary.
IMG_2417.JPG

IMG_2418.JPG

26220159_1774531729224904_2276162379721681533_n.jpg

26804495_1774531702558240_9081496067561918971_n.jpg
 
1 - 3 of 3 Posts
Top