DIY Electric Car Forums banner
1 - 1 of 1 Posts

70 Posts
Discussion Starter · #1 ·
> Message: 3
> Date: Sat, 19 Feb 2011 12:16:20 -0800 (PST)
> From: Jack Murray <[email protected]>
> Subject: Re: [EVDL] capacitor balancing
> To: Electric Vehicle Discussion List <[email protected]>
> Message-ID: <[email protected]>
> Content-Type: text/plain; charset=iso-8859-1
> Actually, what is needed is a way to identify once any cell has reached max
> voltage, so it can then terminate the recharge
> of the entire string. The zener rating would then only have to handle the
> overvoltage during the time it takes to shutoff/bypass the regen into the
> string.

not sure if the balancing boards by maxwell has an led but I think one could
be added or something could be added to get a signal from the board when the
bypass circuit activates.. that signal could be used to control something
else like a circuit that then directs the regen into the batteries.
-------------- next part --------------
An HTML attachment was scrubbed...
| REPLYING: address your message to [email protected] only.
| Multiple-address or CCed messages may be rejected.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.