DIY Electric Car Forums banner

1 - 7 of 7 Posts

·
Registered
Joined
·
25 Posts
Discussion Starter #1 (Edited)
Im ready to start my EV build and was thinking AMD FB1-4001A then I saw the Mars ME 1002 for a lot less money. Like to see if anyone has used the Mars. Or has any input good or bad about the mars 10" ME1002

My ev is an 1986 jeep Comanche weights less then a s10 and has a larger payload. And I hope same bolt pattern for the tran and bell as the s10.

Thanks Bob

MARS ME1002 specs

Voltage
Volts DC​

Current
AMPS​

Speed
RPM​

Torque
NM (Ft Lb)​

Power
KW (HP)​

Efficiency
%​
90​
300​
2423​
90.25 (66.5)​
22.9 (30.7)​
84.8​
250​
2649​
70.23 (51.8)​
19.48 (26.1)
86.6​
220​
2800​
59 (43.5)​
17.3 (23.2)​
87.4​
205​
2912​
54.11 (39.9)​
16.5 (22.1)​
89.4​
180​
3091​
44.8 (33)​
14.5 (19.4)​
89.5​
170​
3200​
42.38 (31.3)​
14.2 (19)​
92.8​


Voltage
Volts DC​

Current
AMPS​

Speed
RPM​

Torque
NM (Ft Lb)​

Power
KW (HP)​

Efficiency
%​
144​
300​
3876​
90.25 (66.5)​
36.6​
85​
250​
4238​
70.23 (51.8)​
31.2​
87​
220​
4480​
59 (43.5)​
27.7​
88​
205​
4659​
54.11 (39.9)​
26.4​
90​
180​
4945​
44.8 (33)​
23.2​
90​
170​
5120​
42.38 (31.3)​
22.7​
93​
 
1 - 7 of 7 Posts
Top