DIY Electric Car Forums banner

FS: Garage Sale – Crystalyte 409, New Headway cells, A123 Dewalts, Cycle Analyst,BMS

3412 Views 2 Replies 2 Participants Last post by  magudaman
10
FS: Garage Sale – Crystalyte 409, New Headway cells, A123 Dewalts,ALL ITEMS ARE SOLD

ALL ITEMS ARE SOLD

Ok I’m clearing out my older and some new electric stuff to give me some funds to keep my prototype bike coming along. IF you think the price is off let me know what you would pay if your interested.

1. ALL ITEMS ARE SOLDNEW Headway cells 38120S – 20x available $18 per cell plus shipping (for 16s cells shipping = $18)
These cells are brand new never used. I purchased 55 cells with the intentions of building 3x 16s packs but was only able to get 2 pack to fit well on the bike. These have been sitting since November in my 68f house. I would really prefer to cells these as one group but I will work with you on that one. These are also the new black top cells with the additional cutouts on the positive end (see photos). ALL ITEMS ARE SOLD






2.ALL ITEMS ARE SOLDALL ITEMS ARE SOLD Crystalyte 409 Motor – Used - $185 Shipped Runs great, I used to have this connected to the controller below. At 66v and 30a I was outputting close to 2kw. Freewheels at around 34mph at 66v. The spokes show light corrosion spots. The wheel was built up by bernson ev and the spokes look a bit loose but never gave me any trouble over the years. I am also tossing in my modified wrench torque arms shown in the below photo:ALL ITEMS ARE SOLDALL ITEMS ARE SOLDALL ITEMS ARE SOLD







3.ALL ITEMS ARE SOLDALL ITEMS ARE SOLDALL ITEMS ARE SOLDALL ITEMS ARE SOLD Dewalt A123 Packs with bypass ouput – 3x $80 each shipped – These are 33v 2.3ah dewalt packs. I wired them up so during discharge the BMS unit is bypassed but still contain the stock BMS for charging and balancing. Since there is no low voltage cutoff I would recommend way to watch voltage. These cells. Also have 2x dewalt chargers which are $25 shipped, person buying above packs have priority.ALL ITEMS ARE SOLDALL ITEMS ARE SOLDALL ITEMS ARE SOLDALL ITEMS ARE SOLD



4.ALL ITEMS ARE SOLDALL ITEMS ARE SOLDALL ITEMS ARE SOLDALL ITEMS ARE SOLD 30a 72v Brushless motor controller with regen – $45 Shipped – This controller has connectors setup for a crystalyte motor. It works perfectly ALL ITEMS ARE SOLDALL ITEMS ARE SOLDALL ITEMS ARE SOLDwith the above motorALL ITEMS ARE SOLDALL ITEMS ARE SOLDALL ITEMS ARE SOLDALL ITEMS ARE SOLD





5.ALL ITEMS ARE SOLDALL ITEMS ARE SOLDALL ITEMS ARE SOLDALL ITEMS ARE SOLD Stand alone cycle analyst - $70 shipped – This is the older version, no black light and no speed. Works beautifully and comes with the handbar mounting hardware. I believe the built in shunt is good for 45 amp continuous. ALL ITEMS ARE SOLDALL ITEMS ARE SOLDALL ITEMS ARE SOLDALL ITEMS ARE SOLD



6. NEW -16s 80a cont. 120a shutdown Balancing BMS $85 Shipped – This is a 16s BMS module. 120ma balancing current. High voltage cutoff, low voltage cutoff, and over current protection. Comes with the wires and connectors (Not pictured)



ALL ITEMS ARE SOLDALL ITEMS ARE SOLDALL ITEMS ARE SOLDALL ITEMS ARE SOLDALL ITEMS ARE SOLDALL ITEMS ARE SOLDALL ITEMS ARE SOLDALL ITEMS ARE SOLD
See less See more
1 - 3 of 3 Posts
Sorry everyone I forgot that I had this post up here and sold this stuff through other forums and ebay. Thanks for looking!
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top