DIY Electric Car Forums banner
1 - 5 of 5 Posts

·
Registered
Joined
·
18 Posts
Discussion Starter · #1 ·
Hi!
I decided to convert a Harley Davidson Street-rod to electric. I have converted a Cagiva Mito 125cc to electric some years ago and felt that I wanted to do it again. This time with higher spec and budget :)

Here is a picture of the bike before work started.

/Marcus
 

Attachments

·
Registered
Joined
·
18 Posts
Discussion Starter · #4 ·
Here are two pictures of the work so far. Most parts have been ordered and expected do be done in 3-5 weeks.
Most stuff is made from aluminium that will be painted or anodized (?).

The pulleys had to custom made due to wrong gearing with the original ones...
I will use HTD8, 30mm wide belt. Pulleys will be 32t and 144t.

The frame is 3d-scaned.

/M
 

Attachments

·
Registered
Joined
·
18 Posts
Discussion Starter · #5 ·
Now some parts starting to arrive from suppliers :)
Most parts that are made from aluminium plate.

* Left motor bracket
* Large battery box
* Small battery box
* Bracket underneath battery that also will fit the Curtis controller

Was a little nerves that there would be a difference in scale between reality and the 3d-scanned frame that i have. But it seems perfect so far.
 

Attachments

1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top