DIY Electric Car Forums banner
1 - 10 of 10 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
hello, I am preparing a project and walk to choose a PMSM electric motor.
even so I found these:





ENSTROJ Emrax 2 brushless 30kW 50kW - 200V dc / 75kW - 300V dc 150N.m 200V DC / 250 Nm 300V DC 2000rpm / 3000rpm ar 11kg ip56 http://www.glider-one.si/
dubious this ...


UQM Hitor Brushless PM Motor/Generator 30kW 50kW 180Nm 6500rpm liquido glycol 41kg enviei mail - $20,690 http://www.uqm.com/pdfs/HiTor 10.13.08.pdf
very good but.. $20.000!


LMC LEM 200 -D135RAGS PMSM 18kW 29.04kW 42Nm 40rpm/V 11kg mandei mail aprox 1300euros + 525 controlador http://www.lmcltd.net/
..


perm motor PMS 156 PMSM 9,5 kW 30 kW 80 Nm 1500 min-1 to 6000 min-1 liquido 31 kg enviei mail http://www.perm-motor.de/site/en/produc ... &linkid2=1
less power..

Anybody know of any more? power from 30 to 40 KW?
very grateful
Nuno
 

·
Registered
Joined
·
4,064 Posts
I wouldn't have said "Lemco's are Brushed PM DC motors " if I wasn't certain.

If you even read their website you linked to, it says right on their homepage:

"..... low voltage high torque permanent magnet DC motors and generators ......"
 

·
Registered
Joined
·
378 Posts
Those ESTROJ motors look like the real deal. Almost too good to be true. Their figures add up. 50kW peak at 3000RPM, 91 - 94% efficiency, 11kg, small enough to fit inside a wheel or bell housing.

The EMRRAD2 motor is 900 euros. Bargain!

Sam.
 

·
Registered
Joined
·
416 Posts
Those ESTROJ motors look like the real deal. Almost too good to be true. Their figures add up. 50kW peak at 3000RPM, 91 - 94% efficiency, 11kg, small enough to fit inside a wheel or bell housing.

The EMRRAD2 motor is 900 euros. Bargain!

Sam.
numbers seems - way off ... five times too good
11kg - 150 nm const /2000rpm; 50 kw/3000rpm ???
weird...
 
1 - 10 of 10 Posts
Top