DIY Electric Car Forums banner
1 - 5 of 5 Posts

·
Registered
Joined
·
258 Posts
Discussion Starter · #1 ·
Hi,

I'm looking for the high, low and linearity voltages of 1st or 2nd gen Leaf cells.

Currently I'm charging them till 4.10V which I consider fully charged.
My low voltages setting is at 3.00V which i consider totally empty.

Are these settings correct ?

What about the linearity between these voltages, could i say that at
3.55V (3.00V + 1.10V/2) the cell is 50% full/empty ?
 

·
Registered
Joined
·
258 Posts
Discussion Starter · #2 ·
Here's what I have found sofar:



Seems that at 3.5V the cell is considered near empty, or below 3.5V theres not much usable energy left.

Meaning the 50% full/empty mark is set at 3.8V
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top