DIY Electric Car Forums banner
1 - 1 of 3 Posts

· Admin: 'one of many'
4,841 Posts
Are you sure the mounts are correctly aligned?

The driver's side one looks very twisted to me, the passenger side less so.

I would suggest removing the mounts and then placing the motor/trans in position with the crane adn resting it on stands or blocks so it is static and safe.
Then place the mounts in their correct locations to see if they are correctly located on the motor/trans.

Having another look I would suggest that maybe it is the centre moun that is wrong.
Are you using the stock mount position on the trans or is it on a made up piece?
1 - 1 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.