DIY Electric Car Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
187 Posts
$10 says VW added that 'feature' themselves :p
Cutting the control pilot line will shut down charging (it sets available current to zero).
Messing with the proximity line should work too - if you simulate the pressing of the latch on the handle the car will stop charging. Apparently the switch is NC and it shorts out a 330ohm resistor, so you'd want to use an NC relay in line with the switch.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top