DIY Electric Car Forums banner
1 - 1 of 1 Posts

2,498 Posts
Also, be aware that if you use Cellogs, you will need a balancing circuit. These place an imbalanced parasitic load on your cells driving them out of balance.
I concur with the others...stay away from 4 volts. It's not worth the risk. Very little energy stored up there.

Look at the DIY charger also.

It seem from your questions, that you have not used the search function much. Do yourself a favor and do some reading here. Lot's of smart folks to help with specifics.

good luck.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.