DIY Electric Car Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Hello to all !

I'm new here as I've just bought an 2013 polaris Ranger Ev that I'm converting to lithium.
It has an onboard DeltaQ quiq 48v charger.

I will use a 6p14s pack with limn cells (3.7v nominal, 4.20 max voltage) managed by a Orion BMS jr2 can version.


So I'm looking for lithium program to load into the DeltaQ charger. I have access to a quiq programmer but can't find any algorithm. The ones loaded into my charger don't match my needs.

After some research the algo #53 which stops at 58.39v (4.17 per cells) could match, so I'm looking for it without success so far.

Many thanks in advance for your help !
 

·
Registered
Joined
·
414 Posts
Hello to all !

I'm new here as I've just bought an 2013 polaris Ranger Ev that I'm converting to lithium.
It has an onboard DeltaQ quiq 48v charger.

I will use a 6p14s pack with limn cells (3.7v nominal, 4.20 max voltage) managed by a Orion BMS jr2 can version.


So I'm looking for lithium program to load into the DeltaQ charger. I have access to a quiq programmer but can't find any algorithm. The ones loaded into my charger don't match my needs.

After some research the algo #53 which stops at 58.39v (4.17 per cells) could match, so I'm looking for it without success so far.

Many thanks in advance for your help !
It is my understanding that these are available on the DeltaQ website.
Software & Accessories - Delta-Q Technologies
 

Attachments

1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top