DIY Electric Car Forums banner

Looking for Aluminium Extrusion for DIY EV Battery Pack Enclosure

1471 Views 2 Replies 2 Participants Last post by  noob_to_pro_soon
If anybody has worked in the past with some Chinese manufacturer that can provide Aluminium extrusions like this, please share the name/website. I want the side extrusion as shown in the linked picture direct off-shelf and do not want to bear the price of a custom die build. So far, I only found an American supplier who I know is not an original manufacturer.

If anyone knows a manufacturer, I'll really appreciate the help.
1 - 3 of 3 Posts
If anybody has worked in the past with some Chinese manufacturer that can provide Aluminium extrusions like this, please share the name/website. I want the side extrusion as shown in the linked picture direct off-shelf and do not want to bear the price of a custom die build. So far, I only found an American supplier who I know is not an original manufacturer.

If anyone knows a manufacturer, I'll really appreciate the help.
You linked a picture with many different types of extrusion cases. It would be helpful to post a picture of what you want and approximate dimensions. Alibaba is full of vendors selling many types of extrusion housings.
You linked a picture with many different types of extrusion cases. It would be helpful to post a picture of what you want and approximate dimensions. Alibaba is full of vendors selling many types of extrusion housings.
Hi, I have corrected the image link. I was having some difficulty in finding a full enclosure that can fit my assembly. So, instead, I started looking for extrusion side panels that have rails to slide metal walls through them. This clearly gives us an advantage of using any sized metal wall. I hope I'm making sense, if not, feel free to say so:)
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top