DIY Electric Car Forums banner

Looking for Docs for StealthEV Charger+DC/DC

2K views 4 replies 3 participants last post by  Ken S 
#1 ·
I bought an integrated Charger + DC/DC converter from StealthEV. The vendor describes this as "SEV33ADE-144", "3.3 KW AIR COOLED CHARGER + 1 KW DC/DC CONVERTER"
This is the 144V version; they also market a 108V version. I understand these are likely rebranded Ovartech chargers.

Unfortunately, it's not working. I need to troubleshoot the charger. It is sending no data on the CAN bus. Nothing. I am looking for diagnostic information. Any ideas?
 
#5 ·
CANBus dataflow during charging behaves as expected. The BMS commands the charger to deliver a certain max current and max voltage(1 Hz). The charger announces its actual behavior (also 1Hz). If the charger receives no messages from the BMS for 5 seconds, then the charger reduces the current to zero. Textbook. (i.e.: so far, no smoke)
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top