DIY Electric Car Forums banner

Need Help with Elcon HF-PFC 3kw Charger

1928 Views 20 Replies 3 Participants Last post by  914EV
I purchased a TC/Elcon HF-PFC-3000 Charger some years ago and am finally assembling the electric car conversion. In starting up this charger for initial test and setup, I have connected pins 1 and 3 of the 7 pin connector. There is no measurable voltage on the DC output. Is this normal? I do not have batteries connected to the charger.

Thank you for any help and advice I have read through many if not all of the excellent forum discussions on this charger or it's near cousins but have not seen anything on this topic.

21 - 21 of 21 Posts
21 - 21 of 21 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.