DIY Electric Car Forums banner
1 - 6 of 6 Posts

·
Registered
Joined
·
305 Posts
Why not use regular black loom, then numerous rolls of orange electrical tape? Seals the loom and marks it as "HV" at the same time...
 

·
Registered
Joined
·
224 Posts
Hi,

I'm looking for orange electrical conduict to be able to obtain something like this:
http://www.km77.com/fotos/bbtcontent/clipping/KM7KPH20100514_0047/5.jpg
I've been looking in many pages but it was imposible to obtain a corrugated conduict with electrical isulation, in orange color and with UV protection. Thanks!

McMaster-Carr has many different types of cable sleeving availible in several colors including orange.
http://www.mcmaster.com/#standard-cable-sleeving/=bd0894
 

·
Registered
Joined
·
10 Posts
Discussion Starter · #6 · (Edited)
First of all thanks everyone for your replies.

McMaster-Carr has many different types of cable sleeving availible in several colors including orange.
http://www.mcmaster.com/#standard-cable-sleeving/=bd0894
This one is what I'm looking for, the only fault is that is Easy-Install, so that is open and they don't have it without the cut.

The thing of putting this in orange color is for showing that there is a danger and you should be aware of cutting that corrugated tube and cable, for example if you have had an accident and the firefighters need to cut the car, all the manufacturers are doing in this way. What I don't want is to have different corrugated tubes because then they won't connect correctly with the coupling
 
1 - 6 of 6 Posts
Top