DIY Electric Car Forums banner

1 - 8 of 8 Posts

·
Registered
Joined
·
285 Posts
Discussion Starter #1
Nearly all pictures -- that were uploaded to DIYELectricCar -- are missing from my build thread (79 Spitfire). (Note this has nothing to do with Photobucket. These pics were all uploaded to DIYElectric car.)

Here's a link from one of the dozens of pictures have been lost:
http://www.diyelectriccar.com/forums/attachment.php?attachmentid=82489&stc=1&d=1504218246

Example post with missing pictures:
http://www.diyelectriccar.com/forums/showpost.php?p=875393&postcount=233

Build thread:
http://www.diyelectriccar.com/forums/showthread.php/79-spitfire-conversion-108210.html
 

·
Administrator
Joined
·
368 Posts
Hey,

The images in the thread seem to be showing for me. What device/browser are you using?

Niall

Capture.JPG
 

·
Administrator
Joined
·
368 Posts
I get the same thing on all browsers. Here's what I see:

With Internet Explorer 11:



With Google Chrome Version 60.0.3112.101 (Official Build) (64-bit)
Have you cleared your cookies and caches before proceeding this issue?
I can't seem to replicate the issue on my end either.

Best regards,

Ed
 

·
Registered
Joined
·
285 Posts
Discussion Starter #5
Have you cleared your cookies and caches before proceeding this issue?
I can't seem to replicate the issue on my end either.

Ed
Thanks for looking into it. Yes, and have tested with multiple computers/tablets.

Can you try this?

Go look at this post in my thread (just one example where the picture has gone away):
http://www.diyelectriccar.com/forums/showpost.php?p=875393&postcount=233

In this post there is this Picture link (that no longer works):
http://www.diyelectriccar.com/forums/attachment.php?attachmentid=82489&stc=1&d=1504218246


Try to open that picture and see if it works for you? When I open it I get this message: "Invalid Attachment specified. If you followed a valid link, please notify the administrator"

This is one of the dozens of pictures that used to work but now do not.

Thanks,
Paul
 

·
Administrator
Joined
·
368 Posts
Hello there,

I am going to start a rebuild and hopefully, that will fix the issue.

Best regards,

Ed
 
1 - 8 of 8 Posts
Top