DIY Electric Car Forums banner
1 - 2 of 20 Posts

· Registered
563 Posts
Please don't do this!

Charging should be done with a set voltage corresponding with the target voltage.
The BMS is there to 'pull the plug' when charging / discharging is not according to the set limits. (and to adjust current when temperature is too high / low)

In your scenario, when something doesn't work, you have your batteries exploding...not a pretty sight.

Other thing is to charge well you really need a CC-CV charge, and turn of charging after reaching 100%SOC.
1 - 2 of 20 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.