Re: [EVDL] BLDC Motor Availability (Was: Q for Lee Hart)
Assuming that you do get a working BLDC controller, (I have no
doubts that you will
what motor would be available for hobbyists
like us to obtain at a reasonable cost (~$2k) in that 60 to 80Kw
range?
Chet
Assuming that you do get a working BLDC controller, (I have no
doubts that you will
like us to obtain at a reasonable cost (~$2k) in that 60 to 80Kw
range?
Chet
--- Dale Ulan <[email protected]> wrote:
> In the 300A region, I've used the Fairchild FMG2G300US60E with
> good success in my BLDC controller, it's a bit low for a brushed
> motor but in the 250V - 380V pack range with BLDC or ACIM it
> should be reasonable.
> With enough voltage, 60 to 80kW should be reasonable and
> those are pretty cheap.
> I don't know if it's of interest, but I'm working on a new BLDC
> control board and I can post schematics and gerbers and source
> code, but I don't have the time for tech support. I don't know
> how many people out there are using BLDC's, but I am.
>
> -Dale
_______________________________________________
For subscription options, see
http://lists.sjsu.edu/mailman/listinfo/ev