Re: [EVDL] Phd in Materials Science on LiFePO4 batteries video WAS: Lithium 60ah 144v

Evan Tuer <[email protected]> wrote:
> On Tue, Dec 14, 2010 at 5:27 PM, tomw <[email protected]> wrote:
>>
>> "80% is where the knee is."
>> Not for my 180Ah CALB cells. The upper knee is at about 3.45V, and I =
can
>> get less than 5Ah into them from that point before they hit their high
>> voltage of 3.6V, so the knee is at greater than 97% charge.
>
> Same cells here and I agree there's very little charging time left
> once the "knee" is passed.
>



-- =

David D. Nelson
http://evalbum.com/1328

_______________________________________________
| REPLYING: address your message to [email protected] only.
| Multiple-address or CCed messages may be rejected.
| UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub
| OTHER HELP: http://evdl.org/help/
| OPTIONS: http://lists.sjsu.edu/mailman/listinfo/ev

Click to expand...