DIY Electric Car Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
4 Posts
Reading thru these posts and I didn't think fresh water would work because H2O is not a conductor. Ocean water is however. What about pounding a steel rod into the ground and just wiring the positive terminal to the grounded rod?

Sent from my Pixel 2 using Tapatalk
 

·
Registered
Joined
·
4 Posts
as soon as you get in the tub, salts from your skin, dirt, soap scum left in the tub, etc make the water become conductive. Pure H2O is a poor conductor. Take 2 clean glass beakers, fill one up with pure distilled non ionoic H2O and fill the other with salt water, then take your multimeter and do some Ohm tests. You'll see the difference
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top