DIY Electric Car Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
121 Posts
Discussion Starter · #1 · (Edited)
In lack of time, money and no personal needs for building another EV so soon, Im selling gen 4 total battery
year 2018 17.6 kwh .
Battery is new with 0 millage.
Car was working before dissasembling , so all electronic , bms , contactors are in working condition.
Inside are 3 modules, each 32S, 52 Ah LG cell
Like on the last picture.
They are able to separate and reconfigure on desire voltage
dimension of each module is 43x33x17 cm ang weight 41 kg.

Price 2400 eu for whole pack + shipping.







 

·
Registered
Joined
·
121 Posts
Discussion Starter · #2 ·
I took batteries out of the box and measure voltages. All 96 cells are on 3.82V .
Each module has slave BMS. With some power supply and arduino CAN bus playing it is possible to get cells reading and balancing. But this is for now beyond my knoweledge.

Im also offering modules one by one if not total battery .







 

·
Registered
Joined
·
6,222 Posts
I'm interested to buy 40-44pcs of your battery cells.
Could you give me specs of them please? Dimensions, photos, connection type?
This pack is not built of prismatic cells. While is possible to reconfigure cells within a module, no rational person would sell only a fraction of a module - the best that you could hope for would be to buy two modules. It would also make no sense to take a module apart just to look at it. The tabs of the 32 cells connected in series in each module will presumably be welded together.

The dimensions of the modules are given in the original post. Each pair of cells in their plastic frame will be about the height of the module (17 cm) by just short of the width of the module by just under one-sixteenth of the length of the module.
 
1 - 4 of 4 Posts
Top