DIY Electric Car Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
17 Posts
My first post in quite a while...

This is my quick and dirty sketch extracted from a 3D scan of a large drive unit Brock Windberg posted on grabcad. I don't have a drive unit in hand yet to verify the numbers.

I'm working on creating a fully associative CAD model of the drive unit, but have only just started on it.

Hope it's useful, and happy new year all.

Dave
 

Attachments

·
Registered
Joined
·
17 Posts
Here's another view from the driver's side of a LHD vehicle. Some notes:

The vertical dimensions on the left (57.9mm and 17mm) are from the center of the motor can to the center of the mounting ear.

I cannot verify if the orientation is correct as it sits in the car, someone with a S or X would have to take some measurements to ascertain the "tip angle".
 

Attachments

1 - 5 of 5 Posts
Top