DIY Electric Car Forums banner
1 - 1 of 8 Posts

· Registered
2 Posts
I bought an original piece from ebay, unfortunately it was aluminiumcable..

I solved it by using alu-cu crimp. Not the optimal solution. I got m3 AWD battery. With two connectors. I will use the both in parallel.

My firs option was to replace alu cable with copper, but there is not much room in the contact. Alu cable is "welded" to cu tab

1 - 1 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.