DIY Electric Car Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
113 Posts
I just looked at the photo; that's the metering system for the injectors, that sits on top of the air filter. It is there because the plate inside measures the air flow and the proper amount of fuel is then delivered to the injectors through the braided hose's. Yes they can retain a few pounds of pressure even after it has been shut down.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top